1960 cat 933f

punkin2011

New User
i have a 1960 cat 933f track loader i put new main and rod bearings in it need to know the torque of mains and rods
mvphoto96916.jpg



This post was edited by punkin2011 on 09/06/2022 at 12:25 pm.
 
If you give me the cubic inch of the engine I can give
you the torque values shown in a publication by Mahle
the maker of aftermarket engine parts. The information
I find is later models have the 3046 5L which is 304
cubic inches, but I am not sure if this is the engine you
have.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top