Case G310E Dozer SN2016229

Can anyone tell me where I can find a wiring diagram for this dozer. I purchased this thing from a guy that had it setting in a old hog house and hasn't been started in 40 years. It show 210 hours which is hard to believe but the man said that was correct and I can't find any wear on it just rust, the engine is free but mice have been the wiring and I need a diagram. I will try to post a couple of pictures.
cvphoto5597.jpg


cvphoto5598.jpg
 
(quoted from post at 13:23:30 02/18/20) Can anyone tell me where I can find a wiring diagram for this dozer. I purchased this thing from a guy that had it setting in a old hog house and hasn't been started in 40 years. It show 210 hours which is hard to believe but the man said that was correct and I can't find any wear on it just rust, the engine is free but mice have been the wiring and I need a diagram. I will try to post a couple of pictures.
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto5597.jpg">

<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto5598.jpg">

Maybe/Hopefully someone will be along with the wiring schematic you need. If you plan on keeping it I suggest you purchase the service and operator's manuals for it. Parts manuals are available on line at partstore.casece.com/us/parts. This site's store has service and parts manuals. There are some on eBay. And you can get them through Case Construction equipment.

The crawler looks good for its age. Like you said 210 hours is hard to believe in 18 to 19 years of running prior to setting 40 years. Could the serial number be 3016229? The Case Collectors site shows the 310Es built in 1961 starting at 3016001 and the 1962 units starting at 3018001. I didn't see any serial numbers that started with a 2.
 
(quoted from post at 21:46:02 02/18/20) I have a service and parts manual if you need one. reply to my email

I have a 310F s/n 3022258. Gas engine. The governor flew apart and the cam broke and I am looking for parts. Any suggestions on who might have parts,?? guessing new parts are a not a avail based on people I have called. A service and or parts manual would be great. Not good on these message boards, didn t see your email pinball. Can you email me: [email protected]
 
The manual in this site's store appears to be a Jensales Manual. It says it covers the 310, 310E, 310F, 310G, 320, and 350, Gas and diesel, with attachments. Here is a link.

https://www.yesterdaystractors.com/...veral on eBay including at least on OEM Case.
 
Apparently modern didn t like me mentioning whose manual the one this site sells looks like. My reply was visible in classic.

tthayman,

If Ralph Newton takes the manual pinball offered him; this store has a service manual. It appears to be a J*e*n*s*a*l*e*s Manual (at least it has the same part number as their reprint) and covers the Case 310, 310E, 310F, 310G, 320, and 350, gas and diesel, with attachments. This same manual is the one that comes up if you check any of these crawlers for a service manual in the YT Store. Here is a link to it in the YT Store.

https://www.yesterdaystractors.com/CAS310G350_2077.htm

There are also several on eBay, including at least one OEM Case manual.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top