Hough payloader help

Cantfindinfo

New User
Ok so I know this is an HUG payloader I know the serial number 14C1877 and I know it's a Hercules gas 6 cylinder jxd engine. What I don't know is what year it is or who's got all the time up parts and brake parts. Any help would be appreciated. Thanks
 
late 1940's through mid 1950's. Tune up parts can be gotten through a NAPA store. Brake parts like master and wheel cylinders can be sourced by size of bore, and
shoes can be re-rivetted with new linings.
cvphoto4403.jpg


cvphoto4404.jpg


cvphoto4405.jpg


cvphoto4406.jpg
 
(quoted from post at 15:34:06 02/06/20) late 1940's through mid 1950's. Tune up parts can be gotten through a NAPA store. Brake parts like master and wheel cylinders can be sourced by size of bore, and
shoes can be re-rivetted with new linings.
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto4403.jpg">

<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto4404.jpg">

<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto4405.jpg">

<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto4406.jpg">

Thank you very much. Edit to previous post, It is not an HUG it is an HU-C. I will be ordering manuals for it soon and going to Napa tomorrow.
 
I am thinking this photo is the of the C model, improved bucket linkage. Those thing were sure ahead of what was around back in the day. Now days I would not spend much on one , just so much out there newer and better. Good luck , o watch the steering sector, check the gear grease in it. Most that I junked out were bad. Rear ends and steering sector were hot items when I had a salvage yard. (30) years ago.
cvphoto4455.jpg
 
I picked up this one last summer. Runs but
needs a manifold. Neat machine but not
sure when I'll get around to it.
cvphoto8401.jpg


cvphoto8402.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top