Older Cat D6-Serial Number

Timdoogs · May 17, 2019

We have an older Cat D6 dozer. We can only find this number on it for an identification number 44A1661 . We are trying to figure out what year it is so that we can get a manual and figure other requirements out like how much oil the motor would take to replace.

Fritz Maurer · May 17, 2019

Your machine is a D6B built July 1960.

hector gemme · May 18, 2019

Yes it is a D6B and have a spair manual instructions and maintenance

Timdoogs · May 18, 2019

(quoted from post at 19:24:40 05/17/19) Your machine is a D6B built July 1960.

Thank you.

Timdoogs · May 18, 2019

How much do you want for the manuals?

hector gemme · May 18, 2019

I want $30.00 for the manual 84 pages.

Timdoogs · May 19, 2019

(quoted from post at 15:43:33 05/18/19) I want $30.00 for the manual 84 pages.

Can you tell me what manual you have? Shop or owner's?

Jim.ME · May 19, 2019

Hector will have to answer for certain but having 84 pages it sounds like the Operator instruction and maintenance manual. Most Shop Service manuals whould be in the 300 plus page range.

Timdoogs · May 19, 2019

(quoted from post at 07:36:15 05/19/19) Hector will have to answer for certain but having 84 pages it sounds like the Operator instruction and maintenance manual. Most Shop Service manuals whould be in the 300 plus page range.

That's what we were figuring. Mostly wanting to know at this point how much oil the engine holds when changing the oil. We are figuring around 22 quarts.

Jim.ME · May 19, 2019

It has been years since I changed one but I think it may be between 7 and 8 gallons. If I remember right; Fill to the full mark on the dipstick then start it and let it idle. Check the level with the engine idling. Some may have had marks on the dip stick for engine stopped as well as idling. Like I said it has been years since I did one.

hector gemme · May 19, 2019

My manual is operations and maintenance not shop manual

wilson ind · Jun 4, 2019

When you drain oil should get a good estimate.

Older Cat D6-Serial Number

Timdoogs

New User

Fritz Maurer

Well-known Member

hector gemme

Member

Timdoogs

New User

Timdoogs

New User

hector gemme

Member

Timdoogs

New User

Jim.ME

Well-known Member

Timdoogs

New User

Jim.ME

Well-known Member

hector gemme

Member

wilson ind

Well-known Member

Similar threads