put the engine back in,, filled with oil,, started it, guess it all came out an 1/8 inch hole right behind the timing cover on the rh side,,, looked it over with a mirror,, the hole is nearly 3/8, but seems to have a piece of rubber in it with an 1/8'' hole in the middle of it,, started on it with an easy out,, then decided to put a barn screw in with a rubber washer,, anyone know what this is for ? its built in the casting,, comes out on an angle toward the ground,, pretty dangerous running it like this,, gonna have to figure something better , or get a low oil pressure alarm,,, screw did fit really really good though,, thanx. had about 48lbs pressure ,, second run...