530ck Transmission

Hoedown

Member
Hey guys, Just picked up a gas powered, 1964 Case 530CK tractor, loader, backhoe. Runs great, but needs a lot of hydraulic work. I have run small equipment before, but this thing is all new to me. The loader and hoe controls I know. It's the transmission that new to me. It is a 4 speed with high and low range, a shuttle shift, and a torque converter. I have zero experience this type of transmission. I got it loaded and unloaded, but it was a bit jerky. Can someone explain how this transmission works? It has a torque converter lock out lever, but I don't know when or how to use it. It is supposed to have a shuttle shift, but I don't know anything about that either. Any info, or videos I can get will be great.
Thanks, Hoedown

cvphoto126720.jpg
 
You have asked this same thing on the Crawlers, Dozers, Loaders and Backhoes Forum and have some replies. It is less confusing if you stay in one place if you are getting responses. If you need more details around those replies, ask for clarification on what you don't understand. My opinion, others are free to disagree.

Have you looked at the manuals I gave you a link to over there?

This post was edited by Jim.ME on 05/27/2022 at 04:20 pm.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top