Specs for Case 930 Clutch adjustment

Only adjustment on the foot clutch is the pedal position. It just needs a little free play. The hand clutch is adjusted so it has a
defined solid snap to engage. If it slips tighten it up.
 
(quoted from post at 06:22:43 09/22/21) Only adjustment on the foot clutch is the pedal position. It just needs a little free play. The hand clutch is adjusted so it has a
defined solid snap to engage. If it slips tighten it up.

Thank you, I have adjusted the free travel. The clutch feels ok however it wont stop spinning to go into gear. It did work when I first used it after not been driven for a few years. Its a wet clutch, could it have anything to do with oil quality. The oil was very thick, I have changed it, would the pressure plate need adjustment.
 
If you have the foot clutch, and it is acting like you describe you need to adjust the clutch brake on the right side of the
tractor.
 
Back to my 930 Case, Its a A401 diesel, it has blown a head gasket on the centre head. Now has water going in onto top of the piston, would you know why the head gasket has blown?
 
(quoted from post at 21:31:46 01/01/22) Back to my 930 Case, Its a A401 diesel, it has blown a head gasket on the centre head. Now has water going in onto top of the piston, would you know why the head gasket has blown?

Any number of things can cause that. There are also other problems that will give the same symptoms.
 
There is a lot of water going into the sump, I think Ill pull the sleeves out and check the O rings on those.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top