Some time ago I purchased an adj. WFE on a pallet in pieces for my VAC. Over the years as a prolonged restoration project I tried to put it on one of the VAC's I have. I have found that the arm that comes from the front post for the long arm from the steering box to connect to, is missing. This is not the "chicken roost" style front end. This is the wfe that is the I-beam style with holes for adjusting width. This is no longer available new and no salvage yard wants to trash a front end by removing that arm. It has held up my project for years. I could have a shop make one or weld/fab on one for a narrow front. But if anyone had a new or used "upper arm" VTA-477 I would be interested.
- Thread starter redtom
- Start date
That will be like looking for the needle. I do not know exactly what the part looks like, and what machining would be necessary, but when I am in your position I go looking for the needed part that I can borrow, and use it for a pattern to have it casted. When casting the part all holes need to be plugged, and all the machined surfaces need to be machined for a proper fit. May be your only option.
casecollectorsc
Well-known Member
- Location
- E central SD.
Are you talking about the arm under the radiator? The arm from a narrow front tractor is different? Have to look at mine to see if numbers match.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy