Some time ago I purchased an adj. WFE on a pallet in pieces for my VAC. Over the years as a prolonged restoration project I tried to put it on one of the VAC's I have. I have found that the arm that comes from the front post for the long arm from the steering box to connect to, is missing. This is not the "chicken roost" style front end. This is the wfe that is the I-beam style with holes for adjusting width. This is no longer available new and no salvage yard wants to trash a front end by removing that arm. It has held up my project for years. I could have a shop make one or weld/fab on one for a narrow front. But if anyone had a new or used "upper arm" VTA-477 I would be interested.
Re: VAC part #VTA-477 needed! in reply to redtom, 01-31-2021 16:48:11
That will be like looking for the needle. I do not know exactly what the part looks like, and what machining would be necessary, but when I am in your position I go looking for the needed part that I can borrow, and use it for a pattern to have it casted. When casting the part all holes need to be plugged, and all the machined surfaces need to be machined for a proper fit. May be your only option.
Today's Featured Article - Case Farm Equipment - by Jeremy Sweeten. My name is Jeremy Sweeten and I am currently a junior at Purdue University. I am takin a dual major in Agriculture Systems Management and Agronomy. I am from North Central Indiana, Miami County to be exact. My dad teaches for Marion Community School Systems an outdoor lab called Asherwood. We live there to manage the place. They just happen to have a Case 311 with a Triple Range transmission. I grew up mowing, pushing snow, and hauling maple sap with it. In 1986 my parents bought an old,
... [Read Article]
JD starter weights for 10,20 series 75ea JD small green fender toolbox with lid 25 right and left cylinder holders,can ship
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.