Adirondack case guy

Well-known Member
Here are some pictures of the header wagon that I have been fabricating from salvaged wagons, for the 20ft. grain head on the newly acquired 2366 combine.------See details over on Implement Alley. --------------------------Loren
cvphoto53076.jpg


cvphoto53077.jpg


cvphoto53078.jpg
 
Loren, you are a very good fabricator, is that made from Kubota crates? Talked to Jack the other day he was planning a trip up this month but thought better about it. Stop in when you are in the area. Fred
 
Looks even Better than it sounded!! Nice Work, I have been fixing fence and hauling water to the Moos,, DRY and HOT here, the plan is to cut the last few acres of wheat and maybe the bit of barley I still have today
cnt

cvphoto53105.jpg


cvphoto53106.jpg

the dark spots are grasshoppers

cvphoto53107.jpg

raised crops here on less than 3" of H20 since last September including the snow we got,, the wheat used the life from the straw to fill the heads, it turns to powder as a result,,

cvphoto53108.jpg

spring wheat and a barely nix here I planted for some bird feed for friends

cvphoto53109.jpg


cvphoto53110.jpg


cvphoto53111.jpg


cvphoto53112.jpg


cvphoto53113.jpg

I had to make a few wood bearings for my auger,, I have since found the correct replacments I will order a couple new sets to have on hand,, by that I mean fulls ets there are 9 sets, the wood ones worked very well

cvphoto53114.jpg


cvphoto53116.jpg

this site is a real Pain to load pics on,, one at a time and I only posted from the little camera
 
Hey Fred, If Jack was to come up here, the ducks would go hungry in the park where he lives!!!
Very minimal use of Kubota crates in this build. Just a few diagonal braces.------------------------Loren
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top