case 430 hyd

jim on van isle · Aug 8, 2020

Is there hydraulic ports on this tractor that I can plumb some lines into to get constant flow so that I can run the hydraulics of our bale wrapper? Thanks. Jim S

mEl · Aug 8, 2020

Not in its present configuration, it may be possible to to get a top hydraulic valve cover off a DOM tractor that fed live hydraulics to the DOM valve and use that as a constant flow feed but it will have to be hooked up to a sump return in open center configuration so flow is not interrupted when the machine is unhooked. If the flow is blocked off the pump will be forced to pump against system pressure and pump damage will occour quickly.

Tgrasher · Aug 8, 2020

What happens when the remote lever stays in a flow position and both hoses are used. Can one power a hydraulic auger?

bradley martin · Aug 8, 2020

You can for a very short period of time before the pump or valve or both burn out. Small reservoir heats up real quick! A lesson I learned the hard way attempting to convey a wagonload of beans.

case 430 hyd

jim on van isle

Member

mEl

Well-known Member

Tgrasher

Well-known Member

bradley martin

Well-known Member

Similar threads