Shell fender wiring

Tgrasher · Feb 4, 2020

Anybody know what kind of fastener Case used to hold the tail light wire as it runs up the outside of the shell fender? One 300 I have has a flat panel brace that the wire runs inside of. Another 300 as well as the 630 and 730 has three steel angle braces running up. I'm thinking it would be a push on wire clip that would hold the wire out of the way of mud/trash. Trying to be Case correct.

joeab · Feb 4, 2020

Yes my 300 has a push on wire clip

Tgrasher · Feb 4, 2020

(quoted from post at 15:32:29 02/04/20) Yes my 300 has a push on wire clip

hank you, it was an inside type of day here (lower So IL) so I when ahead and made a couple that would seem correct. Desert Sunset drying as I type.

Tgrasher · Feb 4, 2020

(quoted from post at 15:32:29 02/04/20) Yes my 300 has a push on wire clip

hank you, it was an inside type of day here (lower So IL) so I went ahead and made a couple that would seem correct. Desert Sunset drying as I type.

Shell fender wiring

Tgrasher

Well-known Member

joeab

Member

Tgrasher

Well-known Member

Tgrasher

Well-known Member

Similar threads