|
| |
| Case Tractors Discussion Forum |
Case 1030 injection pump and injectors
| Author |
[Modern View] |
|
Plowhand
12-31-2019 09:35:31
|
Looking into a 1030..what is the verdict on the pump and injectors are there guys out there to rebuild them along with parts..thanks
|
|
|
|
Dieseltech
12-31-2019 10:12:40
|
|
Re: Case 1030 injection pump and injectors in reply to Plowhand, 12-31-2019 09:35:31
|
|
| |
I seldom see Case pumps in for repair, and usually for governor cover leaks. If engine has not run awhile remove the round rack cap at pump front just above the timing gear case. Rack end screw SHOULD push in easily, and governor starting spring pull rack forward. If not, DO NOT START ENGINE! Rack must be free for governor to control engine speed. The injectors have replaceable nozzle tips, if the original tips don't work right after cleaning.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
560 factory lp has Schwartz wide front new seat all gauges work fast hitch 14.9 38 tires has power steering leak on return side lights work ta works as it should 2 sets rear wheel weights possible trade on other tractors 340 farmall john deeres molines can text pics
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
