430 CASE PTO HOUSING

jbwparts · Nov 11, 2019

DOES ANYONE KNOW HOW DO YOU SEPARATE FRONT AND REAR PTO HOUSINGS ON CASE 430 WITH INDEPENDENT PTO

Adirondack case guy · Nov 11, 2019

Take the 2 flat head screws out that hold the two halves together. They are 3/8
Philips head.----------------Loren

jbwparts · Nov 11, 2019

I DID THAT, ITS STUCK TOGETHER TIGHT. I DIDN'T WANT TO BREAK ANYTHING. I WAS JUST MAKING SURE THAT'S ALL I HAD TO DO. AGAIN FOR YOUR HELP.THANKS

Adirondack case guy · Nov 11, 2019

The dowels and gasket may be stuck.-------------Loren

jbwparts · Nov 11, 2019

YOU WERE RIGHT IT WAS STUCK ON DOWEL PINS. I GOT APART AND INSPECTED EVERY THING , ALL LOOKS GOOD. CLUTCH PLATES AREN'T WARPED . THERE SEEMS TO BE LINING ON THEM YET. THE BRAKE COLLAR SEEMS TO HAVE A LOT OF LINING YET. WAS WONDERING IF THERE IS SPECS ON CLUTCH PLATES THICKNESS? IF YOU HAVE ANY OTHER SUGGESTIONS I WOULD APPRECIATE ANY YOU COULD GIVE ME. THANKS

430 CASE PTO HOUSING

jbwparts

New User

Adirondack case guy

Well-known Member

jbwparts

New User

Adirondack case guy

Well-known Member

jbwparts

New User

Similar threads