Case Nutty

fastfarmall · Nov 8, 2019

Is that one of those trailer you got the combine on, that you can adjust the width? Thanks

Case Nutty 1660 · Nov 8, 2019

No just a 8'6" x 26' gooseneck 14,000 gvw and raisable dove tail,,

Case Nutty 1660 · Nov 8, 2019

forgot a rear view pic,, I have 6-8" of tire off each side

John Saeli · Nov 8, 2019

Tom: How did that knife bar & floor get bent, and how will you fix it?

Case Nutty 1660 · Nov 8, 2019

John it was sagged way worse when I got it,, I adjusted the end of the frame tube as much as I could, loosened allt he mounting bolts hammered tapped ect and got it this good,, I do nto like it but thats all the adjustment there is,, this is the only header I ever seen do this,, it also has a set of home made skid shoes on it and they may be holding it also,, it cuts fine the way it is and the sickle no longer binds like it did when I got it,,

John Saeli · Nov 8, 2019

Is that a skid bottom underneath, for doing soybeans? I would support the ends, maybe on a 4X4, and put down pressure in the middle using a tractor loader.

Case Nutty 1660 · Nov 8, 2019

no soy beans ever through it just small grains, wheat barley only I would say until I got it, used in irrigated ground, High yielding crops,, from what I have seen growing there,, I had fo0rgot all about it being still bowed until I brought it home a couple weeks ago,, I am sure it can be put back, level,
cnt

John Saeli · Nov 8, 2019

Is that a skid plate underneath?

Case Nutty 1660 · Nov 8, 2019

yes for rocks

fastfarmall · Nov 10, 2019

OK thanks

Case Nutty

fastfarmall

Well-known Member

Case Nutty 1660

Well-known Member

Case Nutty 1660

Well-known Member

John Saeli

Well-known Member

Case Nutty 1660

Well-known Member

John Saeli

Well-known Member

Case Nutty 1660

Well-known Member

John Saeli

Well-known Member

Case Nutty 1660

Well-known Member

fastfarmall

Well-known Member

Similar threads