(800) 853-2651
SHOP NOW

Case 830 wide front

P

Pltmann

New User
I have a 1967 Case 841 (830) narrow front .I want to put a
wide front on it, Does a 730 wide front work on this model ? I
have talked to people that say 730 abd 930 both work . I am
looking for a good wide front that fits . If anyone can help
me with what fits and what to look out for in my search , such
as areas that could be worn or welded . Thanks for any input .
 
Everything from the round nose 400 through the 1030 will bolt on. There are some differences over the years and the 9/1030 fronts are a bit heavier.
 
Very little difference, but some. Any wide front from the large frame tractors will work, better to find one of any age that is in nice shape. The very early ones don't turn as short, they will have an angle iron yoke rather than pipe.
 
Changed my 1967 Case narrow front to a late model Case 730 wide front . A couple things I ran into was a support ring ( around the stearing assembly under the tractor ) with 6 bolts . The ring has to come off for the front mount to bolt up . The wide front Tractors do not use this . Replaced the 5/8 bolts with shorter ones 2 1/4 . The ring was pretty stuck . Sprayed up trough the bolt holes as to soak the inside of the ring , Used a chisel to get under it and worked it around to get it off. The other issue was the 730 front mount (lower bolts ) used 5/8 x 2 1/4 bolts . My 830 was threaded for 3/4 on the 2 lower bolts . Had to get 2 2 1/4 x 3/4 bolts and lock washers . Next issue was the 3/4 bolts would not fit through the mount . Drilled them out to 3/4 on my drill press . Bolted right up . I do not know if all 830 tractors use the 3/4 bolt on the front lower mount , but is worth checking to be better prepared to do the job . Hope this someone else .
 
You must log in or register to reply here.

Similar threads

I
Case SC wide to narrow front
Replies
2
Views
240
oldproudvet
O
2
Vintage Dash Light for 730 830 930 1030 Case Tractors
Replies
2
Views
247
2290
2
L
Case 830 COM Comfort King
Replies
6
Views
581
munson1086
M
F
Tractor Stability Question
Replies
15
Views
907
FinallyFarming
F
F
Female quick disconnet fittings on Case Series 830 model
Replies
9
Views
384
nick831
N
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top