round nose 400 flat belt pulley

JOE-ILLINOIS · Jul 28, 2019

Neighbors are looking for a flat belt pulley, put an ad on classifies with no response, so looking for case or tractor salvage yards, name or phone numbers or websites, the gearbox it mounts to part number is 7398, thanks

tomturkey · Jul 28, 2019

That pulley must have been an option 1955-1957 on the 400's. I've only seen one with a pulley. My three, don't look like they ever had one. Hope you find one. Might try all states ag parts, they part out quite a few 400's. Can't be much of a demand???? gobble

bradley martin · Jul 28, 2019

I have one, complete with shaft, off a 700b, which I believe would be the same. Would need to check parts book to be sure. Belt pulley was removed to mount front end loader. Location near London, Ontario.

casecollectorsc · Jul 28, 2019

Looking for the flat pulley also. Someone put a sprocket where the pulley should be....

BarryfromIA · Jul 28, 2019

I read somewhere that was the drive for mounted corn pickers. Something similar was available for the "300" series that bolted to the bottom of the torque tube to drive a picker using it's belt pulley drive. I'm guessing it would have been a 312 rather than a 28 inch wheeled 300. Then the need for more power led to the 350.

CaseDC3 · Jul 29, 2019

I'm learning that a belt pulley is a rare thing on the 400. My 1956 has one and several people have asked me to sell it.

Don L. · Jul 30, 2019

I have one with a chip out . usable
Don L.

round nose 400 flat belt pulley

JOE-ILLINOIS

Member

tomturkey

Well-known Member

bradley martin

Well-known Member

casecollectorsc

Well-known Member

BarryfromIA

Well-known Member

CaseDC3

Member

Don L.

Well-known Member

Similar threads