connor9988
Well-known Member
- Location
- Central Iowa
I bought a DR power trimmer last year on discount but only got a few minutes to actually use it before the cold weather struck.
I bought it to use on the 300 which will be a nice combo with its low range and hand clutch. But the 300 is getting it's eagle hitch arms
repaired so I decided to try it out with the VAC. First gear in the VAC can be a little fast but I stay at about 1/2-3/4 throttle and it
does alright. I replaced the pneumatic dolly wheel with a solid Woods mower wheel that I had on a shelf so there will be no low or flat
tires for it.
Hopefully tomorrow I can post some video of it in action. I currently have some of the lighter duty twine in it but I intend to get some of
the bigger twine in the future.
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto23222.jpg">
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto23223.jpg">
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto23224.jpg">
I bought it to use on the 300 which will be a nice combo with its low range and hand clutch. But the 300 is getting it's eagle hitch arms
repaired so I decided to try it out with the VAC. First gear in the VAC can be a little fast but I stay at about 1/2-3/4 throttle and it
does alright. I replaced the pneumatic dolly wheel with a solid Woods mower wheel that I had on a shelf so there will be no low or flat
tires for it.
Hopefully tomorrow I can post some video of it in action. I currently have some of the lighter duty twine in it but I intend to get some of
the bigger twine in the future.
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto23222.jpg">
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto23223.jpg">
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto23224.jpg">