CountryCase
Member
I am rebuilding the seat on my 400. This ?link? is shot. Just wondering if anyone has one on better shape before I start trying to weld it up. The number on it is A7060
- Thread starter CountryCase
- Start date
CountryCase
Member
Ande
Well-known Member
I have had a thought on the seat on my "730" as mine had a horribly rusted out seat, I plan to replace the seat I put on it and put the seat that is on a "400" or a "DC", to replace, as they are out there.
Not a great picture, but most of you guys know what I mean. I looked in the partsbook, and saw it as a option or maybe standard equipment
Not a great picture, but most of you guys know what I mean. I looked in the partsbook, and saw it as a option or maybe standard equipment
According to the parts book there are supposed to be bronze bushings in the yoke. On mine I put the new bushings in and then filled the gap between the bushing and the yoke with JB Weld to hold them in. I don't like to use JB Weld but made an exception in this case. Welding it up and reboring the holes for new bushings is not going to be easy.
Good luck.
Eli
Good luck.
Eli
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy