No, my firewood is not put up but the ground is soaked, so I am thinking of getting into an in-frame on my DB885 during the delay. I really should be deer hunting but... Anyway, on the UK forum I read mention that the original exhaust valves of some models of David Brown are a potential fail so should be replaced and not re-used. Fact or fiction and if fact, does the 885 fall under the heading of [i:6b928fd15c]better replace 'em while it's apart[/i:6b928fd15c]?
Likely wear is going to dictate new valves (at least) but that won't be determined until it's apart.
Likely wear is going to dictate new valves (at least) but that won't be determined until it's apart.
