Case 580 CK series B backhoe

dkrobach · Oct 11, 2018

Hi all,
New to the forum so any help would be great. I have a 1974 Case CK Backhoe. It has been parked for awhile and I decided to pull it out behind the barn the other day. When I started it up the "transmission hot" light was on right away when I started it. I checked the transmission fluid and that was a little low so I topped it off but the light is still on. I really don't have any idea where to go from here. Any ideaas would be great. Thanks, Dave

pinball · Oct 11, 2018

if its just a light to tell you when the transmission oil is hot then the light should not come on when you turn the key on. if it does suspect you have a grounding problem either in the wiring from the sensor to the light or sensor itself is bad. check the wiring first. follow it back from the light.

Case Nutty 1660 · Oct 12, 2018

Seen the wire from the sending unit under the fuel tank get knocked of the unit and ground causing the light to be lit
cnt

dkrobach · Oct 14, 2018

Thanks for all the help guys. I took off the shroud yestereday and it was a grounding problem like you both said. I really appreciate it. All fixed and ready to go again. Dave

Case 580 CK series B backhoe

dkrobach

New User

pinball

Well-known Member

Case Nutty 1660

Well-known Member

dkrobach

New User

Similar threads