530 about ready to go

dacaseguy

Member
Got my new decals from Maple Hunter and installed them. Need to find a used 7:59x16 3 rib front tire and I'll have the 530 ready to go. Dick
a256315.jpg

a256316.jpg

a256317.jpg

a256318.jpg
 
My Gosh ! You have done a really nice job on that tractor. Looking at it , and thinking like a Dairy farmer might have in the 60's, "that's just the loader tractor my farm needs ! " I'll bet Case dealers sold a lot of tractors in that confirmation. My brother had a 530 Case-O-Matic for a few years, it was a great tractor to load manure with, loader was very strong. Once again , nice work, nice tractor.
 
Dick,

It's hard to believe that is the same tractor you started with. Congratulations on a job well done! Don
 
You did a very nice job on it. Just one comment though. I would turn the front wheels around so they dish in. That was the reason for the special offset in the rim center. It will steer better and put far less pressure on the king pins.
Loren
 
I thought about the dish. It came with rims turned out ? I will look into turning them around. I need to pull the left front to replace the mud grip tire with a three rib soon as I find one. Dick
 
Next project is to finish up the DC4 that's in the shop all primered and ready to paint. It's supposed to be in 70's today. I might roll her out and
get r done. It's been 3 or 4 years since I started on her due to too many other projects including the 530. Dick
a256350.jpg

a256351.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top