Marketplace

Community

Galleries

Research & Info

Miscellaneous

Related Sites

Case Tractors Discussion Forum

Round bailing with a 69 990 DB tractor

Welcome Guest, Log in or Register

Author

[Modern View]

Farmallb

06-21-2014 20:07:32

Report to Moderator

Question I got is, will a 1969 990 DB Brown tractor work on a 5 X 5 NH chain bailer?

[Log in to Reply] [No Email]

chevytaHOE5674

06-22-2014 03:47:50

Report to Moderator

Re: Round bailing with a 69 990 DB tractor in reply to Farmallb, 06-21-2014 20:07:32

Its going to be better than your WD45 but still going to be a little short on power and light on weight if you have any sort of a bump in the field.

[Log in to Reply] [No Email]

Bret4207

06-22-2014 04:54:41

Report to Moderator

Re: Round bailing with a 69 990 DB tractor in reply to chevytaHOE5674, 06-22-2014 03:47:50

I looked at an 800 series NH chain baler this spring. Then I did some searching and found out that my 990 would be light and short of HP. It's light and short on HP for my Hesston 5x5 belt baler as far as that goes if I wanted to try and make 5x5's and the NH is heavier.

So the answer is that's it's a little light and surely short on HP for 5x5's. Until you get the injector pump figured out it's not going to bale anything.
This post was edited by Bret4207 at 04:55:57 06/22/14.

[Log in to Reply] [No Email]

Farmallb

06-22-2014 11:20:47

Report to Moderator

Re: Round bailing with a 69 990 DB tractor in reply to Bret4207, 06-22-2014 04:54:41

I got the fuel filters on and they seal. I got the system primed and it runs. I got the injector pump to working fine, and didn't have to take it anywhere.

[Log in to Reply] [No Email]

Bret4207

06-23-2014 04:32:09

Report to Moderator

Re: Round bailing with a 69 990 DB tractor in reply to Farmallb, 06-22-2014 11:20:47

Farmallb said: (quoted from post at 15:20:47 06/22/14) I got the fuel filters on and they seal. I got the system primed and it runs. I got the injector pump to working fine, and didn't have to take it anywhere.

What did the problem with the pump turn out to be?
This post was edited by Bret4207 at 04:32:35 06/23/14.

[Log in to Reply] [No Email]

Dale in Nw Wa

06-21-2014 22:02:45

Report to Moderator

Re: Round bailing with a 69 990 DB tractor in reply to Farmallb, 06-21-2014 20:07:32

If you have enough hyd hookups should run it I am running a Gehil 1600 all belts this thing makes 6X6 round I am running it with a 53 DC 4 Case It gets a little Winnpy on hills with a full bale so I bale going down Hill Dale H

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Today's Featured Article - ... [Read Article]

Latest Ad: Single front wheel assembly for 18-27 hart par [More Ads]

Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy

Binary file (standard input) matches

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Welcome! Please use the navigational links on your left to explore our website.

Round bailing with a 69 990 DB tractor