Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

can my case 801 handle...

Welcome Guest, Log in or Register
Author  [Modern View]
Larkin

06-04-2014 15:12:57




Report to Moderator

Im farming alfalfa with my case 801b. Always contracted cutting/bailing.

Can I run a gehl 1460 4x5 800 pound rounds?

Will my hydraulic system be strong enough for tying/ ejecting

Also, I have tricycle set up. Bought a wide front to swap out, but wondering if I can just bail the alfafa tim grass mix with the tri.

Will the hay get crushed/wet?




[Log in to Reply]   [No Email]
Bret4207

06-05-2014 04:16:26




Report to Moderator
 Re: can my case 801 handle... in reply to Larkin, 06-04-2014 15:12:57  
I'd try getting some solvent and grease onto the spindles first. Dried grease responds very well to PB Blaster. Shoot it in with a grease gun.



[Log in to Reply]  [No Email]
1031D

06-04-2014 15:39:34




Report to Moderator
 Re: can my case 801 handle... in reply to Larkin, 06-04-2014 15:12:57  
Switch to a wide front. When the hay dries running it over will knock the leaves off and that's the nutrients. I use my 530 to now and my 801 to bale, works good but you need to keeps the throttle up.



[Log in to Reply]  [No Email]
Larkin

06-04-2014 17:52:15




Report to Moderator
 Re: can my case 801 handle... in reply to 1031D, 06-04-2014 15:39:34  
Thats good info thanks.

The wide front I bought seems frozen up.

Ideas?



[Log in to Reply]  [No Email]
1031D

06-04-2014 18:41:24




Report to Moderator
 Re: can my case 801 handle... in reply to Larkin, 06-04-2014 17:52:15  
Quoting Removed, click Modern View to see

Frozen as in wheels won't turn? Pivots froze? Or tubes won't slide? If the wheels won't turn there's needle bearings in the verticle spindles that may be dry or rusty.



[Log in to Reply]  [No Email]
Larkin

06-04-2014 19:10:40




Report to Moderator
 Re: can my case 801 handle... in reply to 1031D, 06-04-2014 18:41:24  
The wheels spin free. But I cant move the linkage, or the pivots/
tubes.

How should I attack it?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea ... [Read Article]

Latest Ad: 800HD moline engine. Very nice condition. Put it back to work or use in a pulling tractor. 3500 [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy