|
| |
| Case Tractors Discussion Forum |
930 3 point not working
| Author |
[Modern View] |
|
Justin Veach
12-02-2013 16:04:05
|
I have a 930 case that has the 3 pt and the hydraulics that do not work, but as soon as you get on an uphill slant, it works flawlessy. Any common reasons that would make that happen, fluid and level is good. Thanks in advance
|
|
|
|
Adirondack case guy
12-03-2013 04:53:36
|
|
Re: 930 3 point not working in reply to Justin Veach, 12-02-2013 16:04:05
|
|
| |
Evidently you have a suction leak, and when the tranny fluid gets closer to the pump, (level rises in rear going up hill) it is picking up the oil.
I would replace the pump quad ring, and see how it acts then. If no improvement you are going to have to pull the rear pto housing and check out the pickup tube and strainer.
Loren
|
|
|
|
Justin Veach
12-03-2013 06:30:21
|
|
Re: 930 3 point not working in reply to Adirondack case guy, 12-03-2013 04:53:36
|
|
| |
I decided last night just to tear the pump out and see what I could see. Upon removal I found that the o-ring was not even there. So I'm assuming that's my problem. Thanks for the response
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
... [Read Article]
Latest Ad:
John Deere wheels rare pair of A1106R 24 inch solid cast rear wheels 3000.00. Pair of BWH / BNH 40 inch spokes 1600.00 pair of John Deere D front spokes 350.00.
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
