Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

intermitten spark 930

Welcome Guest, Log in or Register
Author  [Modern View]
axe55

09-03-2013 22:22:41




Report to Moderator

Sorry if I asked this before. My 930 is acting up again. I checked the points. sometimes a spark then none. My should I just convert to the electronic kit? Seems like it the 930 sits for a while. Then I have this problem. I have to file points w/emery cloth.this time it not working maybe a short ? Thanks in advance




[Log in to Reply]   [No Email]
axe55

09-04-2013 19:52:23




Report to Moderator
 Re: intermitten spark 930 in reply to axe55, 09-03-2013 22:22:41  
I also noticed the resistor was real hot to the touch after I cranked it over a few times.



[Log in to Reply]  [No Email]
brokengun

09-04-2013 12:35:11




Report to Moderator
 Re: intermitten spark 930 in reply to axe55, 09-03-2013 22:22:41  
I had a similar problem with my 930.

The screw that held the points wouldnt hold the points in place.

If you do change over to an electric kit can you please share the info of where you get such a kit. i would like to know.

Thank you
Brokengun



[Log in to Reply]  [No Email]
Dave SE Mich

09-04-2013 16:33:38




Report to Moderator
 Re: intermitten spark 930 in reply to brokengun, 09-04-2013 12:35:11  
Purchased for a 730 from Parts Store on this forum, works well.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Harvestin Corn in Southern Wisconsin: The Early Years - by Pat Browning. In this area of Wisconsin, most crops are raised to support livestock production or dairy herds in various forms. Corn products were harvested for grain, and for ensilage (we always just called it 'silage'). Silo Filling Time On dairy farms back in the 30's and into the first half of the 40's, making of corn silage was done with horses pulling a corn binder producing tied bundles of fresh, sweet-smelling corn plants, nice green leaves with ear; the ... [Read Article]

Latest Ad: Need for John Deere M Power Depth Control Bkt w lifting rod for long arm cultivator [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy