Case Nutty I need your help finding a wiring diagram for 930

Case Nutty I have the service manual, and pictures from case/int'l but none show a true wiring schematic. Would you have one? I would pay for it. I have a wiring mess after 4 wires melted together. I have the dash out and have been in the process of ordering new red plug and black plug wiring harness along with switch, key switch. The tractor's neutral switch was bypassed along with the lighting system never working. I would like to have my lights even if it requires installing a new neutral switch.
Any assistance would be really appreciated JOHN
 
Pretty sure it's in my manual. Mines the 830, but I think the 930 is in there too. I saw this post last week and should have followed thru. I will try to scan and post next week...slim

Is it gas or diesel?
 
Here's a wiring diagram for the 930 GP gasoline/LP tractors. Hope it helps. If it's too small on the forum page to read let me know your e-mail and I'll send a larger copy.

19737.jpg
 
(quoted from post at 08:55:52 08/10/13) Here's a wiring diagram for the 930 GP gasoline/LP tractors. Hope it helps. If it's too small on the forum page to read let me know your e-mail and I'll send a larger copy.

Well it is too small for my eyes anyways. Could you send me a copy at dkeav04 at gmail.com please? I would appreciate it greatly.
 
My email is [email protected]
Would you know where the neutral switch is located. I am going to change it while I am at it. I appreciate all your help.
I bought the old girl 2 years ago and really like it. I have changed the seat, front tie rod and all the steering ujoints,along with power steering hoses. Replaced the tach along with fuel gauge.It is a work in progress while working it in the fields.
 
John the neutral switch is under the floor board to the right of the four speed shifter on the trans top cover I will get you a diagram copied and sent right now we have family here from out of town and a funeral to go to this afternoon will try to get it all done tonight or first thing in the morning glad to help
cnt
 
(quoted from post at 13:55:59 08/10/13) John and dkeav: I e-mailed the wiring diagram to you earlier. If you don't get it let me know and I'll try again.

I did get it, and thank you!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top