| |
Case Tractors Discussion Forum |
Help with shuttle issues on the 5250 Pete, Rod maybe
Author |
[Modern View] |
4435
06-23-2013 19:35:16
|
Was planting soybeans yesterday. Stopped to check boxes, got back in cab, rig won't go forward always has reverse. Cycled clutch numerous times cycled reverser numerous times. She takes off. Does this to me every time I stop rest of the day. If it sets and cools awhile she'll go. Always a hot problem.
Replaced forward solenoid in the winter, thought I had it. I have swapped relays also. Ohmed clutch switches they check out ok. thanks Tom
|
|
|
casetrader
06-24-2013 17:59:17
|
Re: Help with shuttle issues on the 5250 Pete, Rod maybe in reply to 4435, 06-23-2013 19:35:16
|
|
since it cools an works seems like a solenoid, mine did this but would blow a fuse as it got worse,actualy making it easy to locate.some electrical problems are hairpulling,i just keep a extra solenoid and start changing.mfwd seems to go bad on a regular basis.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Massey Ferguson 35 (and up) Tractor Assembly Notes - by Jack Wetmore. These assembly notes are for Massey Ferguson tractors with a two stage clutch and 6 speed, 8 speed and mutli-power transmissions. I see a lot of discussion forum messages regarding damaged clutches from improper assembly. The objective is to have the engine and transmission slide together safely and easily until the gap between the two halves is less than 1/4", BEFORE tightening any of the bolts holding the two together. Using bolts to draw the two halves together will damage the PTO
... [Read Article]
Latest Ad:
combine ih 303 403 101 151 503 615 with grain plat header control
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|