Re: 140 Case Baler Videos in reply to NickatKY, 04-13-2013 20:44:44
Yup, that bailers newer than my 140 W. Mine has the 1/2 tray at the bottom which tips bales on their side. for one thing. I KNOW that he couldnt reach that zerk with that short nozzled GG that is way deep in the plunger chamber in the middle. I had to put on 4 6in extension pipes on my GG to reach it. Course the previous owners likely didnt get excited about greasing it either, as it has a slight slop in it.
Re: 140 Case Baler Videos in reply to Farmallb, 04-15-2013 06:00:02
Farmallb, Where are you located? Did you see the info I posted on the apron? I got both trays for the bale chute with the baler. I just traded for a 140 with green wheels thats about 100 serial #'s ahead of this one.This one must be one of the first ones to have desert sunset on it. Nick
Re: 140 Case Baler Videos in reply to NickatKY, 04-13-2013 20:44:44
Nick, sure enjoyed your video, its great you have preserved them and use them. It helped too, to see the green, as there is still at least 3 ft of snow here
Re: 140 Case Baler Videos in reply to NickatKY, 04-13-2013 20:44:44
Nick. Video was awesome. Makes me want to get out my 130 and try it inthe hay this spring. Dont have a picture to share ,but it sure doesnt look as nice as yours. Painted rust colors Call some evening after dark sometime. Danj
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Trailerin a Tractor, Chains or Straps? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: " I bought a trailer and plan to take my CASE VAS to some shows. I don't yet have anything to secure it to the trailer. So which is better to buy and use; the ratchet-type straps or binders and binder chains?
... [Read Article]
Latest Ad:
Carburetors for sale Marvel Schebler models TSX 408 and a TSX 244 B both rebuilt. Asking 250.00 each Then I have a Carter UT 0-652 on base 0-653 24 on neck with 179380 on throttle shaft asking 50.00 for this one.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.