finally gave up on 930 called mechanic for servu

Welcome Guest, Log in or Register

Author

[Modern View]

axe55

03-08-2013 23:14:27

Report to Moderator

i finally called a tractor mechanic to come out . running on four cyl. all 6 cyl compression test 145 -150 . i pulled the valve cover rockers and push rods working correctly . put 2 new plugs in cly 1 & 2 both had spark. new gas, i'm wondering if plug wires(new but cut to fit)are breaking down. i guess mechanic will figure it out.... it's crazy..... thanks for the suggestions john
This post was edited by axe55 at 23:18:33 03/08/13.

[Log in to Reply] [No Email]

axe55

03-11-2013 10:03:04

Report to Moderator

Re: finally gave up on 930 called mechanic for servu in reply to axe55, 03-08-2013 23:14:27

mechanic came out today turned on the key and wires started smoking in dash area. replaced circuit breaker, still smoked . maybe ignition switch i try to run it down. temp started to drop he's coming back on a better day spitting snow 32 degrees. this tractor could be a reality series.

[Log in to Reply] [No Email]

axe55

03-09-2013 16:12:38

Report to Moderator

Re: finally gave up on 930 called mechanic for servu in reply to axe55, 03-08-2013 23:14:27

the front 2 were champ i replaced them with autolite 3116

[Log in to Reply] [No Email]

Jgarner

03-09-2013 05:45:53

Report to Moderator

Re: finally gave up on 930 called mechanic for servu in reply to axe55, 03-08-2013 23:14:27

qwere the new plugs Champions?? If so, go get 2 equivalent AC plugs of the same heat range and try them, Champion plugs have turned into junk. I will never buy another one. They are probably made in China now to cut cost. I have had the same issue with my 630 and Champion plugs.

Jim

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Today's Featured Article - A 1937 John Deere Unstuck - by Gary Hickman. Here is my story of how I got the pistons out of a 1937 JD B that the engine had been stuck for about 14 years: About 12 years ago my Dad gave me one of the tractors I ran as I was growing up on our farm in central Nebraska. The engine on this tractor, a 1937 John Deere "B", had been stuck for 2 years before he gave it to me. This last spring (1999) I hauled the tractor to our 2 acre lot in St. Libory Nebraska where it joined my antique machinery collection, at that time a 1929 Caterpillar T ... [Read Article]

Latest Ad: M 5 moline.. 336, good TA , 16-9 38 tires..fresh paint PS photos on request....nice 3 point tractor with strong hydraulics new battery and service [More Ads]

Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Welcome! Please use the navigational links on your left to explore our website.

finally gave up on 930 called mechanic for servu