TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Case Tractors Discussion Forum

All Orange case 1031?

Welcome Guest, Log in or Register

Author

[Modern View]

Kevin B from Il

12-29-2012 08:20:55

Report to Moderator

On the form New Ag Talk 12/27/12 there is a post of this tractor with a front wheel assist added thought you case boys would like to see it.

[Log in to Reply] [No Email]

Dalet

12-29-2012 18:57:32

Report to Moderator

Re: All Orange case 1031? in reply to Kevin B from Illinois, 12-29-2012 08:20:55

Quoting Removed, click Modern View to see

That looks like a typical construction job respray. Powerwash it and paint it. No attention to detail or anything. Case didn't even use the emblem that they sprayed at the time to be period correct. Not a bad tractor, just a visually appealing paintjob done one winter somewhere.

[Log in to Reply] [No Email]

Red Ranger

12-29-2012 15:56:57

Report to Moderator

Re: All Orange case 1031? in reply to Kevin B from Illinois, 12-29-2012 08:20:55

Here's another one . . .

[Log in to Reply] [No Email]

Adirondack case guy

12-29-2012 17:07:07

Report to Moderator

Re: All Orange case 1031? in reply to Red Ranger, 12-29-2012 15:56:57

That's what one should look like. Case really screwed up with 70 series tractors, when they didn't offer MFD. I had many a conversation with Case engineering, and Bill Simpson about 4WD, but they were focused on 1470/2470, and failed to recognize the potential for 90-140HP conventional tractors with MFD. With help from Bill S. I was able to get this 1070 HFA developed by Mud Hog drive systems and also HFAs for early 90 series tractors.
Loren

[Log in to Reply] [No Email]

Ande

12-29-2012 18:39:57

Report to Moderator

Re: All Orange case 1031? in reply to Adirondack case guy, 12-29-2012 17:07:07

Gee Loren,Bill was quite the guy wasnt he,he got things done at Case,you sparked my memory,I hate to say this but I had forgotten his contribution to the Case Company.
There was no nonsense with Bill,also talked with him several times,enjoyed every conversation

[Log in to Reply] [No Email]

1031D

12-29-2012 12:05:33

Report to Moderator

Re: All Orange case 1031? in reply to Kevin B from Illinois, 12-29-2012 08:20:55

Kinda figured that with all the odd ball combinations I've seen.

[Log in to Reply] [No Email]

1031D

12-29-2012 09:32:19

Report to Moderator

Re: All Orange case 1031? in reply to Kevin B from Illinois, 12-29-2012 08:20:55

I think they made 3 of them like that. I believe you lost 4th and 8th gear when you put the transfer case in. Someone painted and decaled it that that way. That should be a 1032 by the looks of the fenders.

[Log in to Reply] [No Email]

12-29-2012 16:01:38

Report to Moderator

Re: All Orange case 1031? in reply to 1031D, 12-29-2012 09:32:19

All you could get from the factory was western fenders if you took the 38 rear inch rubber option. It was a package. Only other choice was to take a cab in later years.

[Log in to Reply] [No Email]

Adirondack case guy

12-29-2012 17:22:38

Report to Moderator

Re: All Orange case 1031? in reply to JW, 12-29-2012 16:01:38

We got 1031s with 18.4x38s both ways, elepant ears and rowcrop fenders. We always ordered the rowcrop fenders on 31s but when the 70 series came out there were (deals) on 1030s that wern't shipped down under. We took 3 trailer loads of all tire and fender configurations, 31s and 32s, but all had elephant ear fenders on them. ugly looking, but then, they sold quick with the price that was on them.
Loren

[Log in to Reply] [No Email]

Case Nutty 1660

12-29-2012 16:41:00

Report to Moderator

Re: All Orange case 1031? in reply to JW, 12-29-2012 16:01:38

I sold 5 or 6 1030 "GP" tractors new with 38" rubber all of them had the small fenders only ones I sold that came with the wide ones stock were the Western specials but you could order the wide ones on all of them

[Log in to Reply] [No Email]

Kevin B from Illinois

12-29-2012 18:32:49

Report to Moderator

Re: All Orange case 1031? in reply to Case Nutty 1660, 12-29-2012 16:41:00

Nutty good job did you see your number of posts pretty cool 5555.

[Log in to Reply] [No Email]

12-29-2012 16:48:00

Report to Moderator

Re: All Orange case 1031? in reply to Case Nutty 1660, 12-29-2012 16:41:00

18.4x38 or 15.5x38 ?

[Log in to Reply] [No Email]

Case Nutty 1660

12-29-2012 17:41:15

Report to Moderator

Re: All Orange case 1031? in reply to JW, 12-29-2012 16:48:00

we sold them with 18.4 x 38's most with dualls, we have o irragation here or row crop type farming which is where I have seen them with 15.5 x 38's I have thought them to be a 830 with those small tires at a distance before lol

[Log in to Reply] [No Email]

Kevin B from Illinois

12-29-2012 15:46:20

Report to Moderator

Re: All Orange case 1031? in reply to 1031D, 12-29-2012 09:32:19

Question where did they tie in the drive shaft off the pto, because I am not case guru but I don't think they had belt pullys on those I know the IH 560 tied in that way.

[Log in to Reply] [No Email]

Case Nutty 1660

12-29-2012 16:01:55

Report to Moderator

Re: All Orange case 1031? in reply to Kevin B from Illinois, 12-29-2012 15:46:20

not off the pto, they were power off the pinion shaft, the trans case had a hole/mounting point installed so to speak cnt

[Log in to Reply] [No Email]

Case Nutty 1660

12-29-2012 10:42:06

Report to Moderator

Re: All Orange case 1031? in reply to 1031D, 12-29-2012 09:32:19

Jim, you could order the wide fenders on a "GP" model

[Log in to Reply] [No Email]

TimBinWV

12-29-2012 08:53:59

Report to Moderator

Re: All Orange case 1031? in reply to Kevin B from Illinois, 12-29-2012 08:20:55

Here's a link to the

pics

[Log in to Reply] [No Email]

4x4stude

12-29-2012 21:12:58

Report to Moderator

Re: All Orange case 1031? in reply to TimBinWV, 12-29-2012 08:53:59

I posted pics of that in the auction earlier this year. I remember this tractor at The Great Oregon Steam Up in the tractor pull. He was using a lot of water at the time and thought that is was a head gasket. Sounds as if that were not the case. It had really glossy paint on it at the time. It looks like it has spent some time outside unfortunately. Zane

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea ... [Read Article]

Latest Ad: 800HD moline engine. Very nice condition. Put it back to work or use in a pulling tractor. 3500 [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy