adapter plate

Anonymous-0 · Jul 19, 2012

Looking to make an adapter plate to put a 5.9 Cunnins in a 400 Case. Was wondering if anybody knows where I might get a blueprint of the bellhousing bolt pattern?

casecollectorsc · Jul 19, 2012

Blacksmith in Canby, MN. did that about 3 years ago. One heck of a pullin 400!! Don't know if he would like his name given out.

wilson ind · Jul 19, 2012

print for standard bell housing or special case??? I can send or post standard ase 1 2 3 and 0 sizes and bolt pattern

Anonymous-0 · Jul 19, 2012

Need the pattern for the bellhousing on the Case 400 which is special only to the big series of Case . 400 through 2590 and 1200 through 4690 also.

wilson ind · Jul 19, 2012

would buying a new gasket help?? use as templete

Anonymous-0 · Jul 19, 2012

I keep in regular contact with him and I can ask him. He used IH 1086 frame rails,you'd have to see it it looks like it was made that way. He used a 30 series grill but it had to be widened to clear the engine, he fabricated a hood out of aluminum. I drove it once so far and it was a blast! He was running it in 7th last weekend which is a 22mph gear on the Hotfoot sled.

Anonymous-0 · Jul 19, 2012

I figured if I could get a print it would save me the trouble of setting up a housing on the mill and ploting every thing out. bdoll do you know how your friend mated his engine up to the bellhousing?

adapter plate

Anonymous-0

Well-known Member

casecollectorsc

Well-known Member

wilson ind

Well-known Member

Anonymous-0

Well-known Member

wilson ind

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads