| |
Case Tractors Discussion Forum |
4890 Inj. Pump
Author |
[Modern View] |
John Saeli
01-05-2012 13:27:44
|
Anybody got a good Inj. pump for a 4890?
|
|
|
Rich in IN
01-06-2012 05:09:00
|
Re: 4890 Inj. Pump in reply to John Saeli, 01-05-2012 13:27:44
|
|
I have a pump, need to check numbers to see what it is from, not sure if it is complete. It could be from a 2870. Will look this weekend. I remember it did have mounting base, maybe even drive coupling too.
|
|
|
D-C-741
01-05-2012 21:50:21
|
Re: 4890 Inj. Pump in reply to John Saeli, 01-05-2012 13:27:44
|
|
2870 is the same as far as I can on our 2870 & 4890,If you dint mind what is yours not doing /Skipping, no power or other.Any motor parts for these are not easy to find.and most Dont want to part the motors out even when they are not even fixable.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Antique Tractor Wiring Basics - by Curtis von Fange. One of the most neglected parts of old tractors is the wiring. After sitting in the elements for half a century or more much equipment wiring has deteriorated to sparsely covered strands of copper or other metal. Plastic insulation has cracked, mice have eaten through the older clothed style coverings and the exposed wires have reacted to winter moisture and salts by turning blue and powdery. Terminal ends have corroded, rusted or just plain evaporated away. Aged wires not only keep an engin
... [Read Article]
Latest Ad:
Looking for a John Deere 50, 520 or 530 in good shape and preferably with power steering and three point. May be interested in a 620 or 630. Thank you.
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|