Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

case 148 oil pump

Welcome Guest, Log in or Register
Author  [Modern View]
bobbowman

01-03-2012 15:48:49




Report to Moderator

This message is a reply to an archived post by davejoe on January 30, 2011 at 05:48:14.
The original subject was "case 148 oil pump".

I rebuilt a G148B in 2006. I called a place called Baier tractor. Some old timer set me up with a case diesel engine oil pump new. It was a little thicker more volume pump but bolted right on. Had to change to my reliefe spring has been working fine for 5 years.I think it was for a 190D Case. I know how frustrated I was geting trying to find the pump as every thing else is availible. If you want the info let me know I will look it up in my records. I am now looking for push rods for same engine G148B Brother in law borrowed tractor ran very old gass through it and gummed up valves bent 6 push rods. They are hard to find. If you know where I can find pushrods let me know Thanks.

[Log in to Reply]   [No Email]
C. Amick

01-04-2012 18:22:40




Report to Moderator
 Re: case 148 oil pump in reply to bobbowman, 01-03-2012 15:48:49  
I bought push rods for my 311 with 148 engine from a Case dozer/backhoe dealer. Should be the same engine that is in the Case 310 dozer and others.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Harvestin Corn in Southern Wisconsin: The Early Years - by Pat Browning. In this area of Wisconsin, most crops are raised to support livestock production or dairy herds in various forms. Corn products were harvested for grain, and for ensilage (we always just called it 'silage'). Silo Filling Time On dairy farms back in the 30's and into the first half of the 40's, making of corn silage was done with horses pulling a corn binder producing tied bundles of fresh, sweet-smelling corn plants, nice green leaves with ear; the ... [Read Article]

Latest Ad: Need for John Deere M Power Depth Control Bkt w lifting rod for long arm cultivator [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy