steering assistance

John Seasly · Dec 17, 2011

Would anyone know what causes the steering shaft on Case 930CK to drop down on the bearing support by the first universal?

John Seasly · Dec 17, 2011

Here is a photo of it

Anonymous-0 · Dec 17, 2011

Lots of use and not enough grease. lots of them look like that.

John Seasly · Dec 17, 2011

What would you recommend that I change to put it back to original? What holds the steering shaft up? I have the parts book; and it is hard to tell. Is the support rear steering shaft bearing and ball what needs replaced? John

Anonymous-0 · Dec 17, 2011

don't know if that bearing/bushing is still available or not. I've always found used ones and just welded up the shaft.

John Saeli · Dec 17, 2011

Need to shim directly under the steering wheel.

oldabe30 · Dec 18, 2011

Two bushings A27108.

John Seasly · Dec 18, 2011

Thank you for your suggestions. I will order the bushings tomorrow. And for shim I will need to get a thickness.

John Saeli · Dec 18, 2011

Measure what the shaft drops. You are probably looking at 1" of shims.

steering assistance

John Seasly

Member

John Seasly

Member

Anonymous-0

Well-known Member

John Seasly

Member

Anonymous-0

Well-known Member

John Saeli

Well-known Member

oldabe30

Member

John Seasly

Member

John Saeli

Well-known Member

Similar threads