(800) 853-2651
SHOP NOW

222 case mower deck mounting

G

gusbratz

Member
bought a nice little 222 case, i think it is an 1986 or 1987. the deck was just kinda hanging on the bottome with brackets obviousley in the wrong spots. this seems to be the best configuration i can come up with. is this right? does anybody have a pic i can see? I am left with the c shaped pin you see in the pic. not sure where it goes since i have the deck bolted right to the mule bracket. some one painted the deck and i cant read the model number does any body know the model. i have no belt, does anybody know what belt it takes? if i can find the model maybe i can look up the belt. any help would be appreciated. thanks gus.
1307814442.jpg

1307814464.jpg

1307814500.jpg
 
by the way. does anybody know why when i try to post pics from my photobucket it does what you see above? i post on other forums my useing the image code and it works fine?
 
thanks gary, how did you do that? i click img button then copy the url then click img button again. what am i doing wrong?
 
Belt part # C23358 size 1/2" x 66 1/2 " Use a case/ingersol
belt or a good quality kevlar belt. I have bolted my deck to the
mule drive and hangar. Leave the bolts a little loose to allow the
deck to float. Use a nyloc nut. C type hangar is for the back end of
the mule drive/deck support and attaches to the cross tube for the
height adjusting back wheels on the deck. I use 1/2" pins where
the deck attached to the Hyd lift. This attachment point needs to
float freely.....

rbradk
 
ok, bought a 66" kevlar belt from local TSC store and it fits great. tried to do a little mowing but the grass dosen't need cut so hard to see if it is cutting good but it sure is a nice ride. i don't know it it has a longer wheel base or it is heavier or what but it is a relly smooth ride in the yard. In high range it relly cooks too, drove it out to the mailbox for fun. runs like the wind. i usually don't luck out like this!
1469.jpg
 
well i faild again at picture posting? this time i tried uploading to yt insead of hosing it on photobucket.
 
When you paste just past what you see here.
http://ytforums.ytmag.com/photos/1469.jpg
Again this is to be posted in the Optional Image URL section below the Comments block, not in the comments block.

 
Nice looking 222 by the way. I have an original Case 180. I need to paint but just haven't had the time. That is the only thing it needs though, even the head lights still work.
 
You must log in or register to reply here.

Similar threads

G
Help with my 1958 J.I. Case 420B Industrial
Replies
17
Views
698
Joe (Wa)
J
S
What size and number belt. For 1967 cub lo boy 60 inch
Replies
2
Views
345
scott 1234
S
S
pulley on Mower Deck 1966 Cub Lo Boy International Harve
Replies
13
Views
440
scott 1234
S
S
JD stx38 black deck transmission problem
Replies
3
Views
500
timcasbolt
timcasbolt
1
Up date 9/07/23 Ingersoll Rand
Replies
2
Views
396
1946 BN IHC
1
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top