Case 1070 clutch issue

jdwatson · Jun 8, 2011

I have a 1972 1070 with 4100 hours, when I push the clutch all the way down I get a grinding and squealing noise. Still seems to shift fine if I let the clutch up a little. Anyone have an idea what would be causing this? Thanks for any reply.

DKase · Jun 8, 2011

If you have an 8 speed with a true clutch it might be the throw out bearing. That is how my 970 acted when the TOB started to go.

jdwatson · Jun 8, 2011

I should have specified it is the powershift, which still shifts fine.

Brokengun · Jun 9, 2011

I think your inching pedal is slightly out of adjustment. You need to fix that before it causes a real problem.

It could be as simple as adjusting the pedal travel adjustment screw under the dash at the top of the pedal

Case 1070 clutch issue

jdwatson

New User

DKase

Well-known Member

jdwatson

New User

Brokengun

Member

Similar threads