200B,300B, 400B parts book pic

Case Nutty 1660

Well-known Member
I really like how they used to do the parts books I feel they were a work of art, if you guys like this let me know if not I won't waste time scanning and posting them later cnt tom
a41592.jpg

a41593.jpg

a41594.jpg
 
Thanks guys will keep doing as time allows, Nick I have this 300 lit but no "B" stuff, maybe my Bro Loren has some will post this lit that I have tonight as I haven't scaned it yet, windy here but supposed to get to 80 today and 87 sat or sunday hope all is well later cnt
a41608.jpg
 
Hi Nutty;

I like all your post. Keep up the fine work. I have that 300 lit. book. Thank you.

Charley gold medal winner and world champion powerlifter.
 
I remember seeing farmers names w/tractor serial numbers wrote all over the covers of the parts books at our Case dealer. Good post, what else ya got?
 
I am looking for info for a Case 210 clutch. I just replaced my clutch, (double spline) and pressure plate. I have my tractor back together(really don't want to have to split it again, but will if i have to) and was wondering if their are adjustments to be made on the clutch. I push the clutch in all the way and it doesn't disengage. i adjusted the rod all the way with no difference. Any info would be appreciated. I am also looking for a manual that won't cost me an arm and a leg.
 
did you have the fly wheel surfaced ( ground to spec's) and install a rebuilt pressure plate, and a SAM on a 200is hard to find but a 300B one will serve your needs and are around cnt
 
thanks for your response. i split it again yesterday. i had to adjust the 3 dogs on the pressure plate. they were set at 1/2 inch. i had to set them at 1 1/16 in. they work good now. still looking for springs and balls for the brakes, or any steel plates for the brakes. thanks again.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top