Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

LATE Model 1030 with 540 and 1000 RPM PTO

Welcome Guest, Log in or Register
Author  [Modern View]
Glenn F.

10-18-2010 20:19:23




Report to Moderator

There's a late model 1030 for sale not too far from here with some 1070 features. I have not seen it, but I understand the power steering is similar to that of a 1070, but most interesting is the pto. It can be quickly reversed for a 540/1000 rpm swap just like the 1070 and 1170.

How many 1030's were so equipped from the factory?


Thanks,
Glenn F.




[Log in to Reply]   [No Email]
Bob/wis

10-19-2010 08:04:10




Report to Moderator
 Re: LATE Model 1030 with 540 and 1000 RPM PTO in reply to Glenn F., 10-18-2010 20:19:23  
Glenn, Is that 1030 down toward the southern part of the state? The was one set up with the combo pto form a 70"s series down here. The pto came off a 1070 that was stripped for a puller. That puller was from teh dealership that Jason K posted the pics of the standard tractor with the FWA down here. Also that 1030 had a modded radiator to stop the top tank from popping off the core. This was done with support rods soldered into the tank. They will match up but you have to have the hydrualic controls to engage it. I have a 70 unit here right now with plans on installing it in a 930. Also I am going to install the 970 motor in the 930 too.
Bob

[Log in to Reply]  [No Email]
Moline_guy

10-19-2010 21:10:35




Report to Moderator
 Re: LATE Model 1030 with 540 and 1000 RPM PTO in reply to Bob/wis, 10-19-2010 08:04:10  
Thanks for the information, I think there was some talk about this before but I couldn't remember the details.



[Log in to Reply]  [No Email]
Moline_guy

10-19-2010 06:52:54




Report to Moderator
 Re: LATE Model 1030 with 540 and 1000 RPM PTO in reply to Glenn F., 10-18-2010 20:19:23  
Could have someone took the rear pto unit off a 970/1070 and put on the 1030. I was wondering if they are interchangeable? They look alike, but not sure how the insides match up.



[Log in to Reply]  [No Email]
Moline_guy

10-19-2010 06:52:45




Report to Moderator
 Re: LATE Model 1030 with 540 and 1000 RPM PTO in reply to Glenn F., 10-18-2010 20:19:23  
Could have someone took the rear pto unit off a 970/1070 and put on the 1030. I was wondering if they are interchangeable? They look alike, but not sure how the insides match up.



[Log in to Reply]  [No Email]
Adirondack case guy

10-19-2010 06:13:01




Report to Moderator
 Re: LATE Model 1030 with 540 and 1000 RPM PTO in reply to Glenn F., 10-18-2010 20:19:23  
I'm with Andy on the details, never heard of that. We changed a lot of 1030s over to 540 though. If you can get details and pics we would all like to see them.



[Log in to Reply]  [No Email]
Ande

10-19-2010 05:52:44




Report to Moderator
 Re: LATE Model 1030 with 540 and 1000 RPM PTO in reply to Glenn F., 10-18-2010 20:19:23  
I have to say I have never heard of any mod updates to "1030"s like that,but I"m sure it happened,would love to see some pictures of it if you can Glenn



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Uncle Cecil's Super A Lives Again - by Mike Purcell. A week or so out of most of my childhood summers was often spent with my Uncle Cecil and Aunt Sissie in the small East Texas town of Maydelle on their 80 acre farm. Some of my fondest memories of these visits are those of learning to drive a tractor at the helm of Uncle Cecilís 1948 Farmall Super A. Uncle Cecil was the second owner of this wonderful little tractor, but it was almost as though he had adopted an infant. The original owner was a man from Minnesota who bought her from a local dea ... [Read Article]

Latest Ad: John Deere DUBUQUE Parts for sale- 24 inch power adjust rims, 3 point hitch parts, Utility Rockshaft, Utility Anchor Yoke, 40 Standard ring and pinion, various 40 transmission gears. Other DUBUQUE parts available. [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy