830 top plate on a 930

Welcome Guest, Log in or Register

Author

[Modern View]

IA Case

05-30-2010 09:12:23

Report to Moderator

I haven't investigated it completely but I was wondering if the peices from a dual range 830 will work on a dual range 930 trans cover such as maybe just change the whole thing Thanks

[Log in to Reply] [No Email]

Farmerhr

06-01-2010 20:05:05

Report to Moderator

Re: 830 top plate on a 930 in reply to IA Case, 05-30-2010 09:12:23

You might try looking up the part numbers for both the 830 and 930. If they are the same you are home free. If they are not, do more investigating.

Our Case/IH dealer has the parts lists on their web site. I am sure others might also. This makes comparing easier.

Let us know what you find.

Thank You !

[Log in to Reply] [No Email]

Nedd

06-01-2010 05:33:13

Report to Moderator

Re: 830 top plate on a 930 in reply to IA Case, 05-30-2010 09:12:23

Looks like it would work but I think the lever is different on 930. I think it is bent. Good luck

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Today's Featured Article - Restoration Story: 1964 JD 2010 Dsl - Part 2 - by Jim Nielsen. Despite having to disassemble the majority of my John Deere 2010's diesel engine, I was still hopeful I could leave the engine-complete with crankshaft and camshaft-in the tractor. This would make the whole engine rebuild job much easier-and much less expensive! I soon found however, that the #4 conrod bearing had disintegrated, taking with it chunks of the crankshaft journal. As a resul ... [Read Article]

Latest Ad: need 3 point arms (with the ball) especially need the [More Ads]

Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Welcome! Please use the navigational links on your left to explore our website.

830 top plate on a 930