Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum

Pre-bent Exhaust System?

Welcome Guest, Log in or Register
Author  [Modern View]
Mike in MD

03-09-2010 07:36:15

Report to Moderator

Anyone know a good place to purchase a pre-bent exhaust system including everything from the flange to the muffler?

I just bought a '56 311 with a rusted off horizontal exhaust system. I'm not sure if I want to keep it horizontal but I do need to replace everything up to the manifold. I keep finding mufflers for sale but that's not all I need.

Any help is appreciated.

[Log in to Reply]   [No Email]
Mike in MD

03-11-2010 07:42:08

Report to Moderator
 Re: Pre-bent Exhaust System? in reply to Mike in MD, 03-09-2010 07:36:15  
Thanks for the suggestions. I decided to switch to vertical exhaust given the height of the horizontal muffler above ground. It's also a simpler setup since I could buy the elbow.

I'm sure you'll be hearing from me with other questions.

[Log in to Reply]  [No Email]
C. Amick

03-10-2010 18:56:48

Report to Moderator
 Re: Pre-bent Exhaust System? in reply to Mike in MD, 03-09-2010 07:36:15  
There's one on Ebay. Will it work? See link below.

[Log in to Reply]  [No Email]

03-09-2010 09:35:58

Report to Moderator
 Re: Pre-bent Exhaust System? in reply to Mike in MD, 03-09-2010 07:36:15  
I have a 430 with underneath exhaust. Very similar setup.
A few years ago I ordered everything from Case. Exhaust pipe was pre-bent with all the curves including a dent to clear the steering shaft. Flange welded on too.
Only dissappointment was the muffler. The new one was louder than the old one that had a hole in it. Wasn't the same brand as the original so...

[Log in to Reply]  [No Email]
J Heitkemper

03-09-2010 07:47:11

Report to Moderator
 Re: Pre-bent Exhaust System? in reply to Mike in MD, 03-09-2010 07:36:15  
get a 1/4 rod and bend it the way you feel the pipe shape should turn ,, then go to the mufler shop and them follow the pattern ,

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Today's Featured Article - Talk of the Town: Winterizin Engines - To Drain or Not to Drain? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "Winter is fast approaching..for a gas tractor should the gas tank be drained and run the engine til the carb is dry or do the gas stabilizer products I've heard of work? (tractor will not be used til spring) any other tips for winterizing?? " ... [Read Article]

Latest Ad: WD45 Allis Chalmers tractor that needs some reassembly or will make a great donor tractor. I have the motor torn down currently and due to life changes, I need to sell. Tractor has Firestone 16.9x28 tires. Good metal,, carb, block, manifold, head, etc. Price is negotiable for cash. Calls only 7am to [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy