Josh

I usually choose to not answer these kinds of questions because there is usually not enough information to even begin to give an answer that would be of any help............

Are you buying or selling?

Where are you, and/or the tractor located?

What is the year or serial number of the 930?

Is it a row crop or western variant?

Does good tires mean 30% or 90% tread? What are the tire sizes and are they matched sets?

Wide or narrow front end?

Describe "straight metal".... are the fenders bent? Any dents in the fuel tank? Are the grill screens intact and unmolested? What does the paint look like? Has it been repainted? If so when?

Are their any weights included (wheel weights or front-end weights).

Is there fluid in the tires? If so, are the rims rusted out?

What is the condition of the hydraulic system?

Do all of the gauges and lights work?

Does it have a PTO? If so is it a 540 or 1000 rpm system?

Does it have a three-point hitch or is it a bare-back? If it has a three-point hitch is the top link included?

Does it come with a set of duals.

What brand and model loader is included.... What is the condition of the loader? Any welds? What type of bucket(s) are included?


Based on these and other questions the value could range from $1,000 to $10,000 (although I would be selling rather than buying at $10k)

I am not trying to be an a-hole, but without more information estimating value is an exercise in futility... - Joe
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top