Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

steam engine question

Welcome Guest, Log in or Register
Author  [Modern View]
g mccool

09-14-2009 14:29:20




Report to Moderator

What is the name of the two handles the hold the smoke stack door closed on the front of steam engines. They remind me of the same kind of nut that was used on the tail gate of old straight trucks to hold the tail gate on, but they are a little bigger. I know there is a name for them other than a wing nut. What is it. Gerald




[Log in to Reply]   [No Email]
hardscrabble

09-14-2009 17:23:47




Report to Moderator
 Re: steam engine question in reply to g mccool, 09-14-2009 14:29:20  
Lever nuts.



[Log in to Reply]  [No Email]
ken gyde

09-14-2009 17:15:50




Report to Moderator
 Re: steam engine question in reply to g mccool, 09-14-2009 14:29:20  
Are they called handle nuts?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Product Review: Lead Substitutes - by Mike Schordine. Lead was oriinally added to gasoline as an upper cylinder lubricant. It lubes the valves and seats. If you rebuild the motor, you could use hardened seats and valves, and unleaded fuel. But if your old tractor runs good, a simple lead substitute added to the gas is a perfectly reasonable solution. And, if you are like me, your tractor is under cover, but it sits outside. So with every temperature change, the humidity in the air collects in the fuel tank, in the form of water. ... [Read Article]

Latest Ad: 2 early 1950s Dodge Pickup Trucks flathead 6 engines 4 speed stepside boxes havnt run in 35 yrs Good restoration prospects or parts Price 600 each can hold till late fall for buyer. calls only [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy