Case LA Gearing

Anonymous-0 · Jun 20, 2009

I'm looking for ideas how to lower the gear ratio in a Case LA. These machines were made to get over the ground, but I want to have fun in the tractor pulls. The gearing is too high even in 1st gear. Anyone have some ideas?
Thanks
Kelly

Anonymous-0 · Jun 20, 2009

about as easy to build a bigger engine if speed isn't an issue

Walterdavies · Jun 22, 2009

Use smaller diameter tires I once saw a set 2600X30 on ebay real wide but not very high.
Walt

Anonymous-0 · Jun 25, 2009

Kelly, I own a machine shop in Roscoe, Illinois. We make custom gears & shafts for drag racing cars that need trans upgrades. We change the gear ratio's if needed. We also use high strength alloy steel that seems to hold up better than original in most cases. I have been interested in making tractor gears for some time. If you would like to discuss further, please send me an e-mail. I grew up on a farm, and my father-in-law is an avid Case collector. Doug.

Jim McVay · Jun 25, 2009

You might look into a 600-900 and see if you can convert to a 6 speed or just use some of the parts. It would pull best with 18.4 x 34 rubber.

Case LA Gearing

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Walterdavies

Member

Anonymous-0

Well-known Member

Jim McVay

Member

Similar threads