Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

case dc

Welcome Guest, Log in or Register
Author  [Modern View]
rm48

06-02-2009 06:31:01




Report to Moderator

could use some ideas on removing sleeves from a dc block-suckers are stuck good -scared might ruin block-block is soaking in oil now-any help would be greatly appreciated-thanx




[Log in to Reply]   [No Email]
Ken in AZ

06-03-2009 06:57:53




Report to Moderator
 Re: case dc in reply to rm48, 06-02-2009 06:31:01  
I've done it with 2 hydraulic jacks, a cross beam, a disc and a set of very heavy threaded rods I made for the job. It worked OK and didn't damage any parts but wouldn't do it again that way. My recommendation: Get a puller!

Ken in AZ



[Log in to Reply]  [No Email]
C. Amick

06-02-2009 17:02:04




Report to Moderator
 Re: case dc in reply to rm48, 06-02-2009 06:31:01  
E&K Ag Products sells disc type pullers 417-679-3530 or eandkag@yahoo.com.



[Log in to Reply]  [No Email]
Don L.

06-02-2009 08:43:33




Report to Moderator
 Re: case dc in reply to rm48, 06-02-2009 06:31:01  
Use a proper sleeve puller with a disk of the correct dia. They come out hard. To try with 1/2 correct concocktions will not work.
Don L.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea ... [Read Article]

Latest Ad: 800HD moline engine. Very nice condition. Put it back to work or use in a pulling tractor. 3500 [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy