Craig Hilbrandt
New User
[color=darkred:7b2be7d301]Well, par for the course, I took apart my pressure plate off of my '44 SC to free up the button and adjusting ring. It was a oily mess, so I was cleaning it (and my hands) with paper towels. One of the 3 springs hold the front to the back must have gotten in amongst the towels, and since I was burning sticks that had fallen over the winter, I decided to spruce up the shop. I went to reassemble the pressure plate, but could only find 2 springs. About 2 A.M, I woke up and figured out what had happened. Next morning, I took a magnet out to the burn pile, and sure enough, there it was. It's not as springy any more. I visited auto parts stores, a transmission shop, a small engine / chain saw parts dealer, 4 hardware store and can not find any springs that are anywhere close enough to work.
Does anyone know where a spring for this can be found??? Somebody probably has something somewhere, but so far, I can't find one...
PS... Does this type of thing only happen to anyone else, or is it just me.... Whatever I'm working on is [b:7b2be7d301]NEVER[/b:7b2be7d301] as easy as it should be.........[/color:7b2be7d301]
Does anyone know where a spring for this can be found??? Somebody probably has something somewhere, but so far, I can't find one...
PS... Does this type of thing only happen to anyone else, or is it just me.... Whatever I'm working on is [b:7b2be7d301]NEVER[/b:7b2be7d301] as easy as it should be.........[/color:7b2be7d301]