Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Re: How to pull sleeves? WD 45

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Jeff in TX

02-23-2003 15:47:16




Report to Moderator

Heat up the sleeves with a torch, and when they shrink crush them with a screwdriver and pull them out. BE VERY CAREFUL NOT TO SCRATCH THE BLOCK

Just my $.02 Your milage may vary.




[Log in to Reply]   [No Email]
Jim in Michigan

02-23-2003 17:50:52




Report to Moderator
 Re: Re: How to pull sleeves? WD 45 in reply to Jeff in TX, 02-23-2003 15:47:16  
sleeves on a wd45 are pretty thick,,I dont think you would crush them very easily,,,Jim



[Log in to Reply]  [No Email]
Jeff in TX

02-23-2003 18:19:15




Report to Moderator
 Re: Re: Re: How to pull sleeves? WD 45 in reply to Jim in Michigan, 02-23-2003 17:50:52  
Don't know about a wd45, but that is the easiest way I know. It works REAL GOOD on fords and Massey Fergusons. It was just a thought.



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy