TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Re: Tractor split/Help!

[Show Entire Topic]

Welcome Guest, Log in or Register

Author

Dave Wis

12-07-2002 15:47:35

Report to Moderator

Just a thought, did you try the new disc on the shaft before installing it on flywheel. I've had some that were burred and needed to be cleaned up before they would slip on freely. Also the only lineup tool I've found that works good every time is an old pilot shaft. Without one I have much better luck eyeballing them. The ones with a tapered guide allow too much movement, especially if everything is right on tolerances and needs to be lined up real close to slide together.

[Log in to Reply] [No Email]

12-07-2002 15:56:17

Report to Moderator

Re: Re: Tractor split/Help! in reply to Dave Wis, 12-07-2002 15:47:35

I've never used an old shaft before. I'll have to see if I can dig one up. I did't try the disc on the shaft first either. I went ahead and pulled it back apart. Try again tomorrow. Thanks a bunch. I think maybe I need some time away from this thing.

[Log in to Reply] [No Email]

wheatland47

12-07-2002 18:58:41

Report to Moderator

Re: Re: Re: Tractor split/Help! in reply to JW, 12-07-2002 15:56:17

yes, sometimes, walking away makes a great difference!!!!! I/ve fought split tractors for 2 - 3 hours, won't go!!!! walk away, have a cup of coffee, come back, and they fall together!!!!! !!!

[Log in to Reply] [No Email]

12-08-2002 15:20:06

Report to Moderator

Re: Re: Re: Re: Tractor split/Help! in reply to wheatland47, 12-07-2002 18:58:41

To all who responded, Thanks a million!!!! Haven't had time to jump back on to the beast yet BUT I have given her a good talkin' to and with the feedback you fine folks have provided I'm certain that she will cooperate when next we meet!!!!! !! Thanks again, JW
P.S. I'll post up when we vanquish the foe!!

[Log in to Reply] [No Email]

[Show Entire Topic] [Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy