| |
Re: B and C block
[Show Entire Topic]
Author |
|
justin NY
11-08-2002 18:59:11
|
Dave, Those are common cracks,normally they don't leak!If it doesn't need to get resleeved I would use them,If it needs to be resleeved I would not,I would locate a block that is not cracked. My .02woth Justin NY
|
|
|
Steve in N.J.
11-08-2002 19:11:13
|
Re: Re: B and C block in reply to justin NY, 11-08-2002 18:59:11
|
|
Dave, For what it's worth, I pushed new sleeves in my block and didn't have any problems. The cracks didn't change any, and she seems to run fine. I did put a coating of Permatex on the deck of the block before I put the head gasket on just to help seal the head gasket a little better between the cylinders. Just thought I'd run that by ya before you went out to look for a couple blocks to purchase.... Steve B.
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Restoration Story: 1951 Farmall H - by The Red (John Fritz). I have been a collector of Farmall tractors since 1990 when I first obtained part of the family farm in Eastern Indiana. My current collection includes a 1938 F20, 1945 H, 1946 H, and the recently purchased 1951 H. This article will focus on what I encountered and what I did to bring the 1951 NEAR DEATH Farmall H back to life.
... [Read Article]
Latest Ad:
2 old Dodge Pickup Trucks not running mostly complete early 50s flathead 6cyl stepside box side entry hoods Price 1200 both.
[More Ads]
Copyright © 1997-2022 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|