Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum
:

Allis C with snowplow

Welcome Guest, Log in or Register
Author  [Modern View]
Lumbersawyer

11-23-2022 17:01:17




Report to Moderator

I finally have the snow plow that my Dad had on his B Allis mounted on my C.
Third Party Image




[Log in to Reply]   [No Email]
Lumbersawyer

11-23-2022 19:40:39




Report to Moderator
 Re: Allis C with snowplow in reply to Lumbersawyer, 11-23-2022 17:01:17  
My Dad had weights, chains, and chloride in the tires on his B. I have the C style weights inside the wheels, I plan to put on chains, and beet juice in the tires if needed. I m thinking of putting a 2000lb winch on it to lift it when traveling. It worked well today for a trial run. As you can see the steering is not from a C, in fact I don’t know what the steering gear box is from, it was not hard to fab up mounting it and it works very well. The steering gear box is not from an Allis Chalmers. This post was edited by Lumbersawyer on 11/23/2022 at 07:44 pm.

[Log in to Reply]  [No Email]
old

11-23-2022 19:59:17




Report to Moderator
 Re: Allis C with snowplow in reply to Lumbersawyer, 11-23-2022 19:40:39  
To bad your not close to me. Years ago some one on here sent me pictures of the lift made for that plow that used the hyd system on those tractors and I made a copy for my C



[Log in to Reply]  [No Email]
4wdtom

11-23-2022 19:26:22




Report to Moderator
 Re: Allis C with snowplow in reply to Lumbersawyer, 11-23-2022 17:01:17  
With weight and chains a B or C will push up a very good pile of snow.



[Log in to Reply]  [No Email]
Roy Suomi

11-23-2022 17:57:48




Report to Moderator
 Re: Allis C with snowplow in reply to Lumbersawyer, 11-23-2022 17:01:17  
Man. That's a lot of plow on a C, let alone a B. You got the weights, now get some chains and have at it.. Think Snow..



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t ... [Read Article]

Latest Ad: Looking for a operator platform to fit a 1070 case tractor. Part number is A 62150 old number is A60672. [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy